USB FDD@1306 USB floppy adapter
Revision as of 06:12, 29 December 2018 by <bdi>Foone</bdi> (talk | contribs) (Created page with "== USB_FDD@1306 == 200px|thumb|Front of board This is an adapter for using full-size 3.5" floppy drives as USB floppy drives. It uses an unknown...")
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
USB_FDD@1306
This is an adapter for using full-size 3.5" floppy drives as USB floppy drives. It uses an unknown 24-pin TSOP/TSSOP? microcontroller. The oscillator on the board is 12 mhz.
Chip pinout
C4? | 1 | 24 | DIRECTION |
LED? | 2 | 23 | VCC +5v |
R3 | 3 | 22 | N/C |
Drive Select | 4 | 21 | N/C |
Motor On | 5 | 20 | Wgate |
C3? | 6 | 19 | Write Protect |
USB Data+ | 7 | 18 | Track 0 |
USB Data- | 8 | 17 | DiskChange |
RDATA | 9 | 16 | Index |
WDATE | 10 | 15 | HeadSelect |
VSS | 11 | 14 | STEP |
OSC1 | 12 | 13 | OSC2 |
Note: It seems to use the sorta-compatible Shugart interface, as it uses pin 6 which is N/C in the IBM format.
for "Drive Select" it's hooked up to DS1/DS2/DS3/DS4.
Links
- Disk connector pinout
- auction where I bought this, on 12/28/2018