Difference between revisions of "USB FDD@1306 USB floppy adapter"

From Foone Wiki
Jump to: navigation, search
(Links)
Line 2: Line 2:
 
[[File:Usb_fdd@1306_orig.jpg|200px|thumb|Front of board]]
 
[[File:Usb_fdd@1306_orig.jpg|200px|thumb|Front of board]]
 
This is an adapter for using full-size 3.5" floppy drives as USB floppy drives.
 
This is an adapter for using full-size 3.5" floppy drives as USB floppy drives.
It uses an unknown 24-pin TSOP/TSSOP? microcontroller.
+
It uses an unknown 24-pin TSOP/TSSOP? microcontroller. The chip has "6520" on the underside.  
 
The oscillator on the board is 12 mhz.  
 
The oscillator on the board is 12 mhz.  
  
 
[[File:Usb_fdd@1306_Front.jpg|200px|thumb|Desoldered board]]
 
[[File:Usb_fdd@1306_Front.jpg|200px|thumb|Desoldered board]]
 
[[File:Usb_fdd@1306_back.jpg|200px|thumb|Rear of board]]
 
[[File:Usb_fdd@1306_back.jpg|200px|thumb|Rear of board]]
 +
[[File:Usb_fdd@1306_chip.jpg|200px|thumb|Underside of chip]]
  
  
Line 41: Line 42:
  
 
for "Drive Select" it's hooked up to DS1/DS2/DS3/DS4.   
 
for "Drive Select" it's hooked up to DS1/DS2/DS3/DS4.   
 +
 +
=== Functionality ===
 +
 +
I have an identical (presumably: I need to open my case up and double-check) unit installed in my [[rainbow floppy|main PC]].
 +
It identifies itself to windows as "TEAC USB UF000x USB Device", [https://usb-ids.gowdy.us/read/UD/0644/0000 VID=0644 PID=0000].
  
 
=== Links ===
 
=== Links ===
 
* [http://old.pinouts.ru/HD/InternalDisk_pinout.shtml Floppy drive connector pinout]
 
* [http://old.pinouts.ru/HD/InternalDisk_pinout.shtml Floppy drive connector pinout]
 
* [https://www.ebay.com/itm/34pin-1-44mb-floppy-connecter-to-USB-adapter-cable-34-pin/233051035241 ebay auction] where I bought this, on 12/28/2018
 
* [https://www.ebay.com/itm/34pin-1-44mb-floppy-connecter-to-USB-adapter-cable-34-pin/233051035241 ebay auction] where I bought this, on 12/28/2018

Revision as of 06:25, 29 December 2018

USB_FDD@1306

Front of board

This is an adapter for using full-size 3.5" floppy drives as USB floppy drives. It uses an unknown 24-pin TSOP/TSSOP? microcontroller. The chip has "6520" on the underside. The oscillator on the board is 12 mhz.

Desoldered board
Rear of board
Underside of chip


Chip pinout

C4? 1 24 DIRECTION
LED? 2 23 VCC +5v
R3 3 22 N/C
Drive Select 4 21 N/C
Motor On 5 20 Wgate
C3? 6 19 Write Protect
USB Data+ 7 18 Track 0
USB Data- 8 17 DiskChange
RDATA 9 16 Index
WDATE 10 15 HeadSelect
VSS 11 14 STEP
OSC1 12 13 OSC2


Note: It seems to use the sorta-compatible Shugart interface, as it uses pin 6 which is N/C in the IBM format.

for "Drive Select" it's hooked up to DS1/DS2/DS3/DS4.

Functionality

I have an identical (presumably: I need to open my case up and double-check) unit installed in my main PC. It identifies itself to windows as "TEAC USB UF000x USB Device", VID=0644 PID=0000.

Links